Why there is no single price
Online figures for skimming tend to quote a neat rate, but they hide most of what makes one job different from the next. Two bedrooms of identical size can take very different amounts of work if one has sound, lightly cracked walls and the other has torn paper, crumbling corners and several layers of old paint. The plaster itself is a small part of the bill; time is the big part, and time is driven by the factors below.
That is why LJAY’s does not publish set prices. Louise looks at the walls, explains what they need and gives you a quote for that specific job.
Room size and ceiling height
The obvious starting point is the surface area. A small box room has far less wall than an open-plan kitchen-diner, and a chimney breast, alcoves or a bay window add edges and corners that take longer to finish neatly than a flat run of wall.
Height matters too. Standard ceilings can be reached from a low platform, but tall rooms, stairwells and vaulted ceilings need proper access equipment and slower, more careful work. Plastering overhead is also more demanding than plastering a wall at chest height.
The condition of the walls
This is usually the biggest variable. Hairline cracks and a few dents are straightforward. Blown plaster, where the surface has come away from the wall behind and sounds hollow, has to be cut back and made good before a skim will hold. Old wallpaper must be stripped first, and woodchip in particular can be slow to remove and often leaves damage behind it.
Glossy, flaking or very uneven painted surfaces need preparing so the new plaster bonds. Damp patches should have their cause fixed before any plastering, otherwise the problem returns through the fresh finish.
Preparation, protection and making good
Skimming is wet work. Floors need sheeting, furniture moving or covering, and sockets, switches and fittings protecting. Beads may be needed on damaged corners to give a straight, strong edge. Around windows and doors, edges have to be finished cleanly so frames and sills can be decorated neatly later. All of this is real time on site, even though it is not visible in the finished room.
Ceilings compared with walls
Square metre for square metre, a ceiling is generally more work than a wall. Working overhead is slower and more tiring, light fittings and coving need working around, and existing ceilings often have cracking along plasterboard joints that has to be taped and filled before skimming. Textured ceilings may need extra preparation first. If you are having a room skimmed, it is worth asking whether the ceiling needs doing too, because tackling both together avoids disturbing a finished wall later.
Decorating afterwards in the same job
Fresh plaster is not a finish in itself. Once dry it needs a diluted mist coat to seal it, followed by finish coats of paint or a sizing coat before wallpaper. Booking the decorating with the same person who skims the walls avoids a gap between trades and means the drying time is planned into one schedule. Your quote can show the skimming and decorating together, so you see the full picture of the job.
How to get an accurate quote
The more Louise can see, the more precise the quote. Take photos of each wall and ceiling in daylight, including close-ups of cracks or damaged areas. Measure the length and height of the walls if you can, and note your postcode. Say whether there is wallpaper or woodchip to remove, whether the room will be empty, and whether you would like the room painted or papered once the plaster is dry.
Call 07751 204847 or send the details through the contact page, and you will get a clear quote set after the walls have been seen.
