Why panelling quotes differ so much
Two quotes for what sounds like the same job can be far apart because they are not really the same job. One might allow for a simple grid on a flat bedroom wall with paint left to you. Another might include removing skirting, scribing round an uneven wall, cutting round three sockets and finishing in three coats. Always check what each quote includes before comparing them.
The style you choose
Shaker-style panelling uses rails and stiles fixed to the wall to make rectangular frames. It is fairly quick on a plain wall, but the number of boxes and how precisely they are spaced affects the time. Board and batten, with vertical strips over a flat backing, involves many cuts and fixings, so it builds up quickly over a large area.
Wainscoting, where panelling runs at dado height round a room, means more corners and transitions. Full-height grids or tall geometric designs need careful setting out from floor to ceiling, and every joint shows, so they take longest. Materials matter too: MDF is the usual choice because it is stable and paints well, while solid timber costs more and moves more with temperature.
Wall size, shape and obstacles
A clear, rectangular wall is the simplest canvas. Each obstacle adds cutting and fitting time. Sockets and switches need the panelling worked neatly round them, radiators may need removing and refitting by the right trade, and windows and door frames need trims to meet cleanly.
Stairs are the classic slow job. Panels following the rake of the staircase need angled cuts on every piece, and working at height needs proper access. Alcoves, chimney breasts and sloped ceilings also add measuring and cutting.
Preparation before fitting
Panelling shows up uneven walls because straight timber lines sit against them. Bumpy or bowed walls may need filling, packing or scribing so the frames sit tight and gaps can be caulked. Skirting and dado rails sometimes need taking off or trimming so the design lines up.
If the wall has loose plaster or old paper, that needs dealing with first, since adhesive and fixings need a sound base. Any repair work adds to the job.
Painting the finished panelling
Bare MDF needs priming, then caulking along every joint and edge, then usually two top coats. On a detailed design that is a lot of careful brushwork, especially if the wall behind is painted the same colour in one go. Darker or stronger colours can need an extra coat to look even.
Some homeowners paint it themselves to keep costs down. Others prefer one person to fit and finish so the caulking and painting are done to the same standard as the fitting. Make sure you know which one you are being quoted for.
Getting an accurate quote
The most helpful things to send are a photo of the whole wall, rough measurements of width and height, a picture or sketch of the style you like, and whether you want it painted. Mention sockets, radiators and anything else on the wall.
LJAY's fits wall panelling and decorates it, from hallways and stairs to single feature walls. Get in touch through the contact page or call 07751 204847 and Louise will give you a clear quote for the design you have in mind. No fixed prices are given without seeing the wall.
