Why ceilings need a different approach to walls
A ceiling is lit at a low angle by windows and ceiling lights, so every ridge, patch and lap mark is exaggerated. That is the main reason sheen levels matter more overhead than anywhere else in the room. A finish that looks fine on a wall can make a ceiling look patchy once the sun comes round in the afternoon.
You are also painting upside down. A paint that spatters, drips or dries too fast to blend will show its faults quickly, and it is far harder to touch up a ceiling invisibly than a wall.
Flat and matt emulsion: the default choice
Flat matt reflects very little light, which is exactly what hides imperfections. Most dedicated ceiling paints are a flat matt formulation designed to be thicker, so they spatter less from the roller and cover in fewer coats. Brilliant white is the traditional choice because it bounces daylight back into the room, but a warm or soft white can sit better with cream or stone-coloured walls.
Silk and other sheen finishes are rarely a good idea overhead. Their shine shows up every bump in old plaster and every joint in plasterboard, and they make roller lines more visible.
Kitchens, bathrooms and steamy rooms
Steam and cooking grease are hard on ordinary matt, which can mark when wiped and may encourage mould spots if condensation sits on it. For these rooms, look for a matt or soft-sheen emulsion labelled moisture-resistant, kitchen and bathroom, or scrubbable. These keep a low-glare look while standing up to occasional cleaning. Good ventilation still matters far more than the paint.
Stain blockers for marked ceilings
Water marks from an old leak, nicotine yellowing and soot from candles or open fires all bleed back through water-based emulsion. The fix is a stain-blocking primer over the affected area, or the whole ceiling if staining is widespread, before the topcoats go on. Using extra coats of emulsion instead tends to waste paint and the marks still reappear as it dries.
New plaster and freshly skimmed ceilings
A newly skimmed ceiling is thirsty. Ordinary emulsion sits on the surface and can peel away later. The first coat should be a mist coat: a watered-down matt emulsion, or a purpose-made contract or new plaster matt, that soaks in and seals the surface. Vinyl-based paints are not suited to this first coat because they form a skin that stops the plaster breathing.
Colour, coverage and choosing a sheen
Going from white to white is easy, but painting a coloured ceiling white, or the reverse, can take an extra coat. Some ceiling paints go on pink or lilac and dry white, which helps you see missed patches. The paint finishes guide compares matt, eggshell, satin and gloss in more detail, and the how much paint do I need guide shows how to work out quantities from the ceiling area.
Need it sorted? Book ceiling painting
LJAY’s can take this on for you. See the service or ask for a quote.
