LJAY's Painting and Decorating Services

Common problems

Mould on Walls: Fix the Cause, Then Redecorate

Short answer

Mould on walls grows where moisture sits on a cold surface for long enough. Painting over it does not work: it comes back through the new paint within weeks. The cause, usually condensation, poor ventilation or a leak, has to be sorted first. Once the wall is dry, the mould is cleaned off and killed, stained areas are sealed, and the room is repainted, often with a mould-resistant paint.

Why mould grows on walls and ceilings

Mould needs three things: moisture, a surface to grow on and time. In most UK homes the moisture comes from everyday life. Cooking, showers, drying clothes indoors and even breathing put water into the air. When that warm, damp air reaches a cold surface, such as an outside wall, a corner behind a wardrobe or the ceiling above a window, it condenses into droplets. If the surface stays damp, black mould spots appear within days or weeks.

That is why mould on a wall so often shows up in the same places: bathroom ceilings, bedroom corners on north-facing walls, behind furniture pushed against outside walls, and around window reveals. Black mould on the ceiling of a bathroom with no working extractor fan is one of the most common examples.

Leaks and other moisture sources

Not all mould comes from condensation. A slow leak from a pipe, a failed shower seal, a blocked gutter or damaged roof can keep one area of wall or ceiling wet, and mould grows on the patch. In these cases the mould usually sits in one defined area rather than spreading along cold corners, and it is often accompanied by a brown water mark. The water stain on ceiling page explains how leak marks are dealt with.

If you suspect rising or penetrating damp in the wall itself, that needs a damp specialist or surveyor to diagnose. LJAY’s does not carry out damp-proofing or damp treatment.

Fix the moisture first

Before any redecorating, the reason the wall is wet needs dealing with. For condensation that often means improving ventilation: a working extractor fan in kitchens and bathrooms, opening trickle vents, keeping a gap between furniture and outside walls, and heating rooms more evenly. For leaks, the plumbing or roofing problem needs repairing and the wall left to dry out fully.

If you redecorate before the cause is fixed, the mould will come back however good the paint is. This is the most important point on this page.

Cleaning off mould safely

Once the moisture is under control, the mould is removed. Surface mould is treated with a fungicidal wash, left to work, then wiped off, and the area is treated again so spores are killed rather than just smeared around. Mould should not be dry-brushed or sanded, as that spreads spores into the air. Heavily affected wallpaper is usually stripped, because mould grows into the paper and paste behind it. Wear gloves and ventilate the room if you are cleaning a small patch yourself.

Sealing stains and redecorating

Mould often leaves grey or black staining in the plaster even after it is killed. Painting straight over it lets the marks show through. The cleaned, dry area is sealed with a stain-blocking primer, and any plaster damaged by long-term damp is repaired or filled. The room is then repainted. In bathrooms, kitchens and rooms that suffered condensation, a mould-resistant or moisture-resistant paint adds protection. These paints contain fungicides that slow regrowth, but they do not replace good ventilation.

When mould keeps coming back

If mould returns quickly after cleaning, the moisture source has not been solved. Common reasons are an extractor fan that does not run long enough, windows that are always closed, or a hidden leak. Paint can bubble and peel in the same rooms for similar reasons; the paint bubbling and peeling page covers that. Once the cause is resolved, redecorating gives a clean, fresh room that stays that way.

Need it sorted? Book painting and decorating

LJAY’s can take this on for you. See the service or ask for a quote.

FAQs

Common questions

Can I just paint over mould on my walls?
No. Mould grows back through ordinary paint. The moisture cause needs fixing, the mould killed and cleaned, and stains sealed before repainting.
Is anti-mould paint enough on its own?
It helps slow regrowth, but it will not stop mould if the room still has a condensation or leak problem. Treat the cause first.
Why is there black mould on my bathroom ceiling?
Usually steam from showers condensing on a cold ceiling with too little ventilation. A working extractor fan and an open window after showering make a big difference.
Does LJAY’s do damp-proofing?
No. LJAY’s redecorates once the moisture problem has been sorted. Rising or penetrating damp needs a damp specialist or surveyor.

Have a project in mind?

Let’s give your home a flawless finish.

Request a quote
Call nowGet a quote