Asbestos testing comes first
Artex and similar textured coatings applied before the year 2000 may contain asbestos. You cannot tell by looking. A sample should be taken and tested by an accredited laboratory before the coating is sanded, scraped or drilled. Testing is a separate step with its own cost, and the result decides how the job can be done. If asbestos is found, the work must follow the relevant regulations and may need a licensed or specialist contractor; LJAY’s will only proceed where it is safe and appropriate to do so.
Removal or skimming over
There are two main routes. One is to remove the texture using a steaming or chemical softening method, then make good the plaster. The other is to leave the artex in place, apply a bonding coat and skim over it to create a flat surface. Skimming over is often quicker and creates less mess, but adds a little thickness and depends on the artex being well bonded. Removal is more labour-intensive but takes the ceiling back to its original surface.
Size of the area and depth of pattern
A small toilet ceiling is a very different job from a large lounge ceiling. Pattern matters too: a shallow stipple is easier to skim flat than heavy swirls or peaks, which may need knocking back or an extra coat to bury. Walls with artex are less common than ceilings but follow the same principles.
Condition of the ceiling underneath
Artex was sometimes used to hide cracked or uneven ceilings. Once removed or skimmed, problems such as loose plasterboard, cracks along board joints or sagging areas may need repair. Ceiling skimming covers the finishing stage in more detail.
Protection, access and clearing up
Rooms are emptied or furniture covered, floors protected and the area sealed to control dust or moisture. High ceilings and stairwells need platforms or towers. Light fittings and coving may need removing and refitting or replacing. All of this adds time beyond the ceiling itself.
Decorating and getting a quote
A newly skimmed ceiling needs to dry and then take a mist coat before painting. Including the decorating in the same booking keeps the job to one trade. To get a quote, have older artex tested first, then send LJAY’s the test result, room size, photos of the pattern and a note of any cracks. Louise will explain the options for your ceiling.
Why the method changes the price
Steaming or chemically softening a textured ceiling is careful, slow work, and the softened material has to be collected and disposed of properly. Skimming over avoids that stage but needs a bonding coat and enough plaster to bury the peaks. Comparing the two options for your specific ceiling is part of the quote conversation, and Louise will explain the trade-offs honestly.
Walls as well as ceilings
Some homes have textured coatings on walls too. The same testing and the same choice between removal and skimming apply, and doing walls and ceiling in one booking avoids repeating protection and set-up.
Need it sorted? Book artex removal
LJAY’s can take this on for you. See the service or ask for a quote.
