LJAY's Painting and Decorating Services

LJAY’s Painting & Decorating

Skimming a Ceiling for a Smooth, Paint-Ready Finish

Tired ceilings skimmed smooth and paint-ready.

Professional home finishes

Made to look right—and last.

Skimming a ceiling puts a thin new coat of finishing plaster over the existing surface, hiding fine cracks, old patch repairs and uneven paint build-up. It is the usual answer when a ceiling is sound but looks tired, and it gives a flat surface that takes paint far better than a patched one.

When a ceiling needs skimmed

Ceilings that show lots of hairline cracks, ridges from old repairs, flaking layers of distemper or paint, or joints showing through on plasterboard are good candidates. If the ceiling is sagging or the plaster has come away from the joists, a skim alone will not hold, and a new plasterboard ceiling is the better choice.

How the work is done

The room is cleared or furniture covered, and floors are protected. Loose material is scraped off and any cracks are taped with scrim. The surface is then sealed with a bonding agent or PVA so the new plaster does not dry out too quickly. Two thin coats of finish plaster are applied and trowelled up as they firm, leaving a smooth, hard surface. Working overhead takes skill and a steady platform, which is why ceilings take longer than walls of the same area.

Painting a newly skimmed ceiling

Fresh plaster has to dry right through before decorating. It changes from dark pink to an even pale colour as it dries. A diluted mist coat is applied first so the paint can soak in and grip, then the finish coats go on. The painting new plaster guide explains the drying signs and the mist coat in more detail.

What affects the cost to skim a ceiling

The size of the ceiling, how much preparation it needs, the height and access, and the number of fittings to work around all play a part. Textured or heavily painted ceilings need more preparation than plain ones. Coving that needs removed or protected adds time, and so does including the mist coat and painting in the same job. The skimming walls cost guide covers these factors in more depth for walls and rooms.

Skim, overboard or just paint?

A ceiling that is flat with only a couple of fine cracks may just need filling and painting. One with widespread cracking, old patches or a rough surface but sound plaster is a good fit for skimming. A ceiling that is loose, sagging or water damaged needs new plasterboard first. Pressing gently on cracked areas, or listening for a hollow sound when tapped, gives a rough idea of whether the plaster is still bonded. Louise will check this before recommending the right option.

Get a quote

FAQs

Common questions

Can an artexed ceiling be skimmed?
Textured coatings can often be skimmed over once the surface has been checked and prepared. Older Artex can contain asbestos, so it must be tested before any work that disturbs it.
Can a painted ceiling be skimmed?
Yes, if the paint is sound. Loose or flaking paint is scraped back and the surface sealed so the new plaster bonds properly.
How long before a skimmed ceiling can be painted?
It depends on the room’s temperature and ventilation, but often several days or longer. Wait until the plaster is an even pale colour with no darker patches.
Is ceiling skimming messy?
It is cleaner than taking a ceiling down, but drips and dust are expected, so floors and furniture are covered throughout.

Have a project in mind?

Let’s give your home a flawless finish.

Request a quote
Call nowGet a quote