LJAY's Painting and Decorating Services

LJAY’s Painting & Decorating

Repointing Brickwork

Crumbling mortar raked out and repointed.

Professional home finishes

Made to look right—and last.

Mortar wears out long before bricks do. When joints crumble, water gets in, frost breaks them up further, and the wall starts to suffer. Repointing rakes out the failed mortar and replaces it, protecting the brickwork and making the whole wall look cared for again.

What is repointing?

Repointing is renewing the outer part of the mortar joints between bricks or stones. The old, failed mortar is raked out to a proper depth, the joints are cleaned, and fresh mortar is pressed in and finished to match the style of the original pointing.

It is different from rendering or rebuilding: the bricks stay exactly where they are, and only the joints are renewed.

Is repointing necessary?

Mortar is the sacrificial part of a wall. It is meant to be softer than the brick so it weathers first, and when it has worn back or crumbled away, rain sits in the joints and frost breaks the edges of the bricks themselves. Left long enough, that turns a maintenance job into a repair job.

Signs pointing is due: mortar recessed or missing from joints, sandy debris at the foot of the wall, damp patches appearing inside after rain, or joints you can scrape out with a key. Catching it at this stage keeps the wall sound and avoids bigger work later.

Is repointing easy?

The idea is simple; doing it well is not. Joints have to be raked to an even depth without damaging the brick edges, the new mortar has to match the wall in strength and colour, and it has to be packed in properly rather than smeared over the face of the bricks. Smudged mortar over brick faces and joints that dry a different shade are the marks of a rushed job.

Weather matters too. Mortar should not go in during frost or onto a wall baking in direct sun, so timing is planned around conditions.

Walls, steps and garden brickwork

House walls, garden walls, steps, chimney stacks and boundary walls all need repointing eventually, and outdoor brickwork in Scottish weather tends to need it sooner. Small areas can often be repointed on their own; where joints have failed across a whole elevation, doing the lot at once gives a consistent finish.

Repointing sits alongside LJAY’s wider masonry and brickwork repairs, so damaged bricks can be replaced at the same time. Get in touch with photos of the wall and Louise will advise on what it needs.

Get a quote

FAQs

Common questions

What is repointing?
Raking out worn mortar from between bricks and replacing it with fresh mortar, renewing the joints without disturbing the bricks themselves.
Is repointing easy?
It is straightforward in principle but easy to do badly. Joints must be raked evenly, the mortar matched, and it must be packed in properly without smearing the brick faces.
Is repointing necessary?
Yes, once mortar has crumbled or recessed. Open joints let water in, and frost then damages the bricks, turning a small maintenance job into a larger repair.
How do I know if my wall needs repointing?
Look for recessed or missing mortar, sandy debris at the base of the wall, or joints you can scrape with a key. Photos help Louise advise.

Have a project in mind?

Let’s give your home a flawless finish.

Request a quote
Call nowGet a quote