LJAY's Painting and Decorating Services

LJAY’s Painting & Decorating

Door Painting for Interior Doors

Interior doors sanded, primed and painted.

Professional home finishes

Made to look right—and last.

Doors take more knocks and handling than almost any other surface in the house, so a tired door shows wear quickly. Door painting brings them back with a smooth, hard finish. Done well, there are no runs at the edges, no brush marks across the panels and no paint on the hinges.

Preparing doors properly

Handles and other hardware are removed or carefully masked. The door is washed to remove grease from hands, dents and splits are filled, and the whole surface is sanded to give the new paint a key. Old gloss is sanded until the shine is gone. Any bare wood is primed, and knots are sealed so resin does not bleed through the finish.

Painting varnished and stained doors

Varnished pine and stained hardwood doors can be painted, but not straight onto the varnish. After sanding, a bonding or adhesion primer is applied so the topcoat grips the slick surface. Without it, paint can scratch off easily. Very dark stains may need an extra undercoat to stop them showing through a pale colour.

Order of work for a smooth finish

Panelled doors are painted in a set order: mouldings and panels first, then the middle rails, the vertical stiles and finally the edges. Working this way keeps a wet edge and avoids lap marks. Flush doors are rolled and laid off with a brush. Two coats are usual, with a light sand between them. The frame and architrave are done separately, and the woodwork and skirting painting page covers those in more detail.

Choosing a finish

Gloss gives the toughest, most traditional finish. Satin has a softer sheen and is now the most popular choice for interior doors. Eggshell is lower still and suits a modern look. Water-based paints dry faster and stay white, while oil-based gloss is very hard-wearing but can yellow over time. Front doors face weather and need exterior products, so they are best discussed during a quote.

Updating doors in a whole house

Painting every internal door at once gives a consistent finish through the house and is more efficient than doing them one by one. Many homes have doors in mixed states, some old gloss, some varnished pine, some newer primed ones, and each needs a slightly different preparation. Agreeing one colour and sheen for all of them ties hallways and landings together. Frames and skirting are often refreshed at the same time so the doors do not make the woodwork around them look tired.

Get a quote

FAQs

Common questions

Can varnished doors be painted?
Yes. They are sanded and primed with an adhesion primer first so the new paint bonds properly.
Do doors need to come off to be painted?
Not usually. Most interior doors are painted in place, with hinges masked and the floor protected.
How long before a painted door can be closed?
Water-based paints are usually touch dry within hours, but the paint hardens over several days, so doors are left slightly open at first to stop them sticking.
Should I paint both sides of a door the same colour?
Not necessarily. Many people match each side to the room it faces, with the edges painted to suit.
Can you paint door frames and skirting at the same time?
Yes. Frames, architraves and skirting are often painted in the same visit so all the woodwork matches.

Have a project in mind?

Let’s give your home a flawless finish.

Request a quote
Call nowGet a quote