LJAY’s Painting & Decorating
Stud Wall and Partition Wall Installation
New partition walls framed, boarded and finished.
Professional home finishes
Made to look right—and last.
A stud wall is the quickest way to divide one room into two, close off an alcove or form a walk-in cupboard without the weight and mess of blockwork. LJAY’s can build the frame, board it, finish the joints and decorate the new wall, so you deal with one person from first measurement to final coat.
How a stud wall goes up
The job starts with setting out. A head plate is fixed to the ceiling joists and a sole plate to the floor, lined up so the finished wall runs straight and plumb. Upright studs are then fixed between them at regular centres, with noggins across the middle to stiffen the frame and give solid fixing points for shelves, radiators or a wall-hung TV later on. If there is a door, the opening is framed out with a proper lintel above it.
Timber framing is common in houses, though metal stud is also used. Either way, the frame needs to sit tight to the existing walls at each end so the new partition does not move or crack where it meets them.
Boarding, insulation and sound
Once the frame is in and any cables have been run by your electrician, the wall is boarded on both sides. Standard plasterboard suits most rooms, while moisture-resistant board is better near a bathroom. Before the second side goes on, the cavity can be filled with acoustic insulation slabs. This makes a real difference between a bedroom and a living space, or where a home office sits next to a child’s room.
For better sound reduction, denser acoustic plasterboard or a double layer of board can be used. It costs more in materials and labour, so it is worth deciding early which walls really need it.
Taping, finishing and decorating
A partition only looks built in when the joints vanish. Board joints are taped and filled, or the whole wall is skimmed for a single smooth surface, then corners are beaded so they stay sharp. After drying, the wall is mist coated and painted to match the room, and new skirting and architrave can be fitted and glossed.
Because LJAY’s also skims and decorates, there is no gap between trades where a bare wall sits waiting for weeks.
Common reasons to add a partition
Splitting a large bedroom into two smaller ones, creating a utility area off a kitchen, forming an en-suite space or boxing off an understairs cupboard are all typical uses. If the new layout needs a ceiling as well, the plasterboard ceilings page covers that work.
Planning the new layout
Before the frame goes up, think about where doors will open, which side light switches should sit, and whether radiators or sockets need moved. A new wall can leave one half of a room without a window, so ventilation and natural light are worth checking early. Marking the line on the floor with tape for a few days helps you live with the layout before anything is fixed. Skirting, architraves and any coving are matched to the existing room so the partition looks as though it was always there.
FAQs
Common questions
- What is a stud wall?
- A stud wall is a non-load-bearing wall made from a timber or metal frame covered in plasterboard. It is lighter and quicker to build than a masonry wall and is used to divide space inside a home.
- Does a stud wall need a building warrant in Scotland?
- It depends on what the wall changes, for example if it creates a new room, affects fire escape routes or alters a bathroom. Rules vary with the job, so check with your local council’s building standards team before work starts.
- Can a stud wall carry shelves or a TV?
- Yes, if noggins or extra timbers are added at the right height while the frame is open. Mention anything heavy you plan to hang so it can be allowed for.
- How soon can a new partition be painted?
- Once the joints or skim coat are fully dry. Skimmed walls need longer than taped joints before the mist coat goes on.
Have a project in mind?
