Size and shape of the wall
The obvious starting point is the length and height of the partition. Longer walls need more studs, more boards and more joints to finish. Height matters too: a tall ceiling in an older house can mean boards are joined horizontally as well as vertically, which adds taping and filling. Walls that need to step around a chimney breast, meet a sloping ceiling or fit an uneven floor take more measuring and cutting than a straight run between two square walls.
Doorways, openings and services
Adding a doorway means framing an opening with a header, fitting a lining and later hanging a door and adding architrave. Each opening is a noticeable step up in labour. If the new wall needs sockets, switches or a light, an electrician has to run cables before the boards go on, so the work is planned in stages. Pipes, radiators or a boiler flue on the line of the wall all affect the layout and the time involved.
Frame, boards and insulation
Stud walls are framed in timber or light metal track. Both are common; the choice depends on the building, the span and what will be hung on the wall later. Plasterboard comes in standard, moisture-resistant, fire-rated and acoustic grades, and the right grade depends on the room. Acoustic insulation between the studs is popular when splitting a bedroom or creating a home office, and it adds both material and fitting time. The plasterboard vs plaster guide explains how boarding compares with traditional plastering.
Finishing: tape and fill or skim
Once boarded, the wall needs finishing. Taping and jointing gives a smooth surface ready for paint, while a full skim coat creates a continuous plaster face that matches skimmed walls around it. A skim adds drying time before decorating. Corner beads on external corners, beading around the door lining and making good where the new wall meets old plaster all take extra care.
Stud wall removal cost
Taking a stud wall out is usually simpler than building one, but cost still depends on what is in it. Cables, switches or pipework inside have to be made safe and rerouted. The ceiling, floor and side walls are left with scars where the frame was fixed, so making good the plaster and flooring is often the bigger part of the job. Before removing any wall, it is important to confirm it is not load-bearing; if there is any doubt, a structural engineer or builder should check it first.
Decorating and getting a quote
A new wall usually means the room is redecorated so old and new surfaces match. Combining the partition, finishing and painting in one booking avoids the gaps between separate trades. Send LJAY’s the room size, a sketch of where the wall should go, whether you need a door and a few photos. Louise will talk through the options and quote for your exact layout.
Stud walls in older Scottish homes
Older tenements and stone houses often have uneven floors and ceilings that are out of level, so the frame is scribed and packed to fit rather than dropped straight in. Coving and cornicing on the line of a new wall needs cutting neatly and making good. These details add a little time but make the partition look as though it has always been there.
Need it sorted? Book stud walls and partitions
LJAY’s can take this on for you. See the service or ask for a quote.
