LJAY’s Painting & Decorating
Board and Batten Panelling
Vertical batten panelling set out and painted.
Professional home finishes
Made to look right—and last.
Board and batten panelling uses vertical strips of timber or MDF fixed over a flat wall to create a strong, rhythmic pattern. It has a more modern, linear look than traditional shaker frames and works at full height or as a half-height wainscot. This page explains how it is planned and finished.
What board and batten looks like
In its simplest form, evenly spaced vertical battens run from the skirting up to a horizontal top rail. Some designs add a mid rail or turn the pattern into a grid of tall rectangles. Because the wall between the battens is painted the same colour, the result reads as one textured surface, which suits darker colours particularly well.
Setting out the spacing
Good panelling depends on the layout. The wall is measured so the gaps between battens are equal and end neatly at corners, windows and doors, rather than leaving a thin sliver at one end. Sockets, switches and radiators are marked so battens can avoid them or be trimmed around them cleanly. On uneven walls, the height of the top rail is set with a level rather than following a sloping ceiling or floor.
Fixing, filling and caulking
Battens are fixed with adhesive and pins into the wall. Pin holes are filled and sanded, and every joint between batten and wall is caulked so no shadow gaps show once painted. This stage takes longer than the fixing itself, but it is what makes panelling look built-in rather than stuck on.
Painting the finished panelling
The panelling is primed, then painted in two coats. A durable eggshell or satin is a popular choice because it wipes clean and copes with knocks. The wall above can be painted a contrasting shade or papered. Hallway panelling and shaker panelling pages show other styles if you are comparing looks.
Where it works best
Board and batten suits hallways, where it protects lower walls from scuffs, bedrooms as a headboard wall, and living rooms as a feature. Narrow spaces can look taller with full-height vertical battens. The wall panelling cost guide explains what changes the price without quoting figures.
FAQs
Common questions
- What is the difference between board and batten and shaker panelling?
- Board and batten uses mostly vertical strips for a linear look, while shaker panelling forms framed rectangles with top, bottom and side rails.
- How far apart should battens be?
- There is no single rule. The spacing is worked out from the wall width so the gaps are even and finish neatly at each end.
- Can board and batten go on an uneven wall?
- Yes, within reason. Battens can be packed and the top rail levelled, but very poor walls may need repair first.
- Does it have to be painted one colour?
- Most people paint battens and wall the same colour for a clean look, but a contrasting wall colour above the top rail is common.
Have a project in mind?
