LJAY’s Painting & Decorating
Artex Removal and Skimming Over Artex
Textured coatings tested, then skimmed smooth.
Professional home finishes
Made to look right—and last.
Artex and other textured coatings date a room instantly, and most homeowners want them gone. In many cases the neatest answer is not scraping the texture off but skimming over it, giving a flat, modern ceiling or wall. One important safety step comes first: older Artex can contain asbestos, so it must be checked before any work starts.
What is Artex?
Artex is a textured coating that was applied to ceilings and sometimes walls, mainly from the 1960s to the 1980s, in swirls, stipples and fan patterns. It was popular because it hid uneven plaster, but it traps dust, is awkward to paint, and most people now prefer a flat surface.
The name is often used for any textured coating, whatever the brand. The approach to dealing with it is the same either way.
Is Artex dangerous?
Artex applied before the mid-1980s can contain a small amount of asbestos. Left alone and in good condition it poses little risk, but scraping, sanding or drilling it can release fibres, which is why it should never be disturbed without checking first.
The safe process is straightforward: a sample is tested before any work begins. If the result confirms there is no asbestos, the surface can be prepared and skimmed. If asbestos is present, the coating must be dealt with by a licensed asbestos removal contractor, and Louise will tell you that plainly rather than touch it.
How Artex is fixed once it is confirmed safe
Once a test confirms the coating is safe to work on, the usual answer is to skim over it rather than scrape it off. Scraping is slow, damages the plaster beneath and creates a huge amount of mess. Skimming buries the texture under a fresh coat of finishing plaster, leaving a smooth surface that looks like a new ceiling.
The texture is prepared first: loose or flaking areas are removed, high points are knocked back where needed, and the surface is treated so the new plaster bonds securely. Heavier textures may need two coats to cover fully.
Painting over Artex
If you want to keep the texture for now, Artex can be painted, and a fresh coat does brighten it. Paint will not flatten the pattern, though, and heavy textures can look worse once a new colour draws the eye. Where the coating is sound and tested safe, painting is a reasonable short-term option before skimming later.
After a skim, the plaster needs to dry fully before it is sealed with a mist coat and painted. Because LJAY’s also decorates, the whole job from texture to finished ceiling can be handled together. See the skimming and plastering page for more on the process, or plaster repairs for localised fixes.
FAQs
Common questions
- What is Artex?
- A textured coating applied to ceilings and walls, mainly from the 1960s to the 1980s, in swirl and stipple patterns. It was used to hide uneven plaster.
- Is Artex dangerous?
- Older Artex can contain asbestos. Undisturbed it poses little risk, but it must be tested before any scraping or skimming. If asbestos is found, a licensed removal contractor is needed.
- How do you fix an Artex ceiling?
- Once a test confirms it is safe, the texture is prepared and skimmed over with finishing plaster, leaving a smooth, flat surface ready to paint.
- Can you just paint over Artex?
- Yes, if the coating is sound and has been confirmed safe. Paint freshens it but will not flatten the texture.
Have a project in mind?
