LJAY’s Painting & Decorating
Drywall Repair for Holes and Damaged Plasterboard
Holes and damaged plasterboard patched invisibly.
Professional home finishes
Made to look right—and last.
Plasterboard is tough in daily use but easy to damage with a door handle, a removed fixing or a leak from above. A drywall repair cuts out or fills the damaged area, finishes it flush with the surrounding wall and leaves it ready to paint, so you cannot tell where the hole was.
Small holes and dents
Screw holes, plug holes and small dents are filled in layers, sanded flat and spot primed. Doorknob holes and anything bigger than a fist need more than filler, because there is nothing behind them to hold it. These are cut back to a neat square, a backing piece is fixed inside the cavity, and a new section of board is fitted, taped and finished.
Patch or replace the whole board?
A patch makes sense when the damage is local and the rest of the board is sound. Replacing the full sheet is better when the board is soft from water, crumbling at the edges, badly cracked along its length or has several holes close together. Water-damaged board should only be replaced once the leak itself is fixed and the area has dried out.
Sometimes the joints between boards crack rather than the board itself. That usually points to movement or poor fixing, and the joint needs re-taped rather than just filled again.
Getting an invisible finish
The trick is feathering the filler or skim well beyond the patch so there is no ridge to catch the light, then priming before painting. Painting just the repair rarely matches, so most repairs are finished by repainting the whole wall from corner to corner. LJAY’s can include that decorating in the same visit.
What affects drywall and plasterboard repair cost
Cost depends on the number and size of holes, whether boards need patched or fully replaced, how easy the area is to reach, and whether the wall is repainted afterwards. Replacing board behind radiators, around sockets or on a ceiling adds time. Grouping several repairs into one visit is usually better value than separate call-outs.
For cracks and blown patches in solid plaster walls, rather than plasterboard, see the plaster repairs page.
Common causes of plasterboard damage
Door handles swinging into walls are the classic cause, which is why a door stop is worth fitting after a repair. Heavy shelves or TV brackets fixed only into board, without proper cavity fixings, can pull out and leave a ragged hole. Leaks from bathrooms or radiators soften the gypsum and stain the face. Moving furniture up and down stairs dents corners and edges. Knowing the cause helps stop the same damage coming back once the wall is painted.
FAQs
Common questions
- Can a hole in plasterboard be patched invisibly?
- Yes. Once the patch is fitted, taped, feathered out and primed, then the wall repainted, the repair should not show.
- Should I patch or replace damaged plasterboard?
- Patch local damage on otherwise sound board. Replace the sheet if it is soft from water, crumbling, or has lots of damage across it.
- Why does my plasterboard joint keep cracking?
- Repeated cracking at a joint usually means movement or loose fixings. Re-fixing the board and re-taping the joint gives a longer-lasting fix than more filler.
- Do you repaint after a drywall repair?
- Yes, repainting can be included. Painting the full wall gives a better match than touching up the patch alone.
Have a project in mind?
