LJAY's Painting and Decorating Services

LJAY’s Painting & Decorating

Woodwork and Skirting Board Painting

Gloss and satin finishes on skirting, doors and frames.

Professional home finishes

Made to look right—and last.

Freshly painted woodwork is what makes a decorated room look finished. LJAY’s prepares and paints skirting boards, architraves, door frames, doors and window boards in gloss or satinwood, with the sanding and priming that stops the finish chipping or yellowing early.

Why woodwork takes the most patience

Skirting boards sit at floor level where hoovers, shoes and mops hit them. Doors are touched hundreds of times a week. Frames and architraves catch every knock from furniture and hoovers. That is why woodwork paint has to be harder than wall paint, and why the preparation matters more than the brand on the tin.

Rushed woodwork shows within months: brush marks, drips along the bottom edge of doors, paint that chips where it was applied over dust or old flaking gloss. Doing it properly is slower, but the finish lasts for years.

How the work is done

Every surface is cleaned first, because grease and polish stop new paint gripping. Old gloss is sanded to key the surface and knock back any runs or brush marks from previous coats. Chips, dents and nail holes are filled and sanded flush, and gaps between skirting and wall are caulked so the top edge reads as one clean line.

Bare or sanded-back timber gets a suitable primer or undercoat before the top coat. Knots are sealed so they do not bleed through. The finish coat is then applied in the direction of the grain, with edges cut in neatly against walls and floors.

Gloss, satinwood or eggshell

Traditional gloss gives the hardest, shiniest finish and suits period doors and banisters. Satinwood has a softer sheen that many people prefer in modern rooms, and it shows fewer brush marks. Eggshell sits between the two and works well where you want a quieter look on skirting and frames.

Water-based versions of all three dry faster and stay whiter for longer than older oil-based paints, which tend to yellow over time, especially in rooms with little daylight. Louise can talk through which suits your home when she quotes.

From yellowed gloss to a fresh finish

One of the most common requests is repainting woodwork that has gone cream or yellow with age. The old coating is sanded back, cleaned and primed so the new white or coloured finish covers evenly and does not chip at the first knock.

Woodwork is usually painted after walls and ceilings, so if you are having a room decorated it makes sense to include the skirting, doors and frames in the same job. See the interior painting and decorating page for how a full room comes together, or the hallway, stairs and landing page for banisters and spindles.

Get a quote

FAQs

Common questions

Do I need to sand skirting boards before repainting?
Yes. Sanding keys the old surface so the new paint grips, and it smooths out old brush marks and runs. Skipping it is the main reason new paint chips.
Is gloss or satinwood better for skirting?
Gloss is harder and shinier; satinwood has a softer sheen and shows fewer brush marks. Both are durable when the preparation is done properly.
Can you paint over old varnished wood?
Yes, once it is sanded back and primed with a suitable adhesion primer so the new finish bonds.
How many coats does woodwork need?
Usually a primer or undercoat followed by one or two top coats, depending on the colour change and the condition of the existing finish.

Have a project in mind?

Let’s give your home a flawless finish.

Request a quote
Call nowGet a quote